MISSION
KNIVES & TOOLS EOD DEMINING PROBES
Non-Magnetic probes available in fixed or take apart configurations
Mission Take
Apart EOD Demining Probesets
For demining operations, especially for influence mines, the screw together
TA EOD Probes have been a real SUCCESS. Two models are currently available,
both in titanium alloy and include 4 titanium sections (tip, 2 extensions,
handle) and a Delrin hadnle. The TA1 and TA2 are identical, except that
the TA2 has knurling on the individual pieces, which makes for easier
disassembly in the rain, snow, and mud. All titanium pieces screw together
and can be configured in the following manner -
Plastic Handle
+ Titanium Handle Section + Titanium Tip Section = 18"
Plastic Handle + Titanium Handle Section + 1 Titanium Extension + Titanium
Tip Section = 24"
Plastic Handle + Titanium Handle Section + 2 Titanium Extensions + Titanium
Tip Section = 30"
For those operators
not requiring all 5 pieces, a 3 piece model (18" overall length when
assembled) of the TA1 or TA2 probe is offered as well.
All TA probes are
1/4" diameter and come standard with a probe sheath pouch that can
be worn on the belt, or carried in a Load Bearing Vest pocket.
Mission has designed
these titanium probes to keep the operator alive. Titanium is non-magnetic,
non-corrosive, tougher than steel, and wil not break in subzero temperatures.
Because of these properties, titanium is the ideal material to find sub-surface
mines in the safest fashion.
The
current "suicide sticks" made out of plastic, carbon fiber,
fiberglass fishing rods, aluminum, wood, etc, bend or break and give the
operator an unclear "feel" when locating mines.
Mission's objective
in building these EOD designed probes is to give the operator the best
of all possible odds. It is much harder to make a serious mistake with
a proble that does not over-flex or break when you are probing for a mine.
Mission Knives
& Tools Fixed EOD Demining Probesets
As successful and built out of the same materials as the TA probes, these
fixed length EOD probes are used in applications where it is not a requirement
to disassemble the probes. The F1 probes are offered in either 18"
or 26" overall length (including handle), and come standard with
a ballistic nylon web sheath with belt loop. Custom lengths can be ordered
as well. These probes also come with a Delrin handle that is press fit
into the 3/16th" diameter titanium rod.
These slim titanium
probes, designed by EOD personnel, won't break in subzero temperatures,
won't corrode, and won't set off magnetically triggered influence mines!!
Attention
Military Customers -
All Mission Mine Probes have been awarded National Stock Numbers!
Supply Officers / NCO's may purchase using Government Credit Cards!
Model
# |
Description |
NSN |
TA-1
(3pc) |
Plain
Titanium
|
NSN
6665-01-432-6213 |
TA-1
(5pc) |
Plain
Titanium
|
NSN
6665-01-432-6213 |
TA-2
(5pc) |
Knurled
Titanium
|
NSN
6665-01-444-1083 |
F-1
probes |
18"
& 26" lengths |
NSN
6665-01-432-1083 |
|
|